BRECO^® and BRECOFLEX^® BATK and BAT curved timing belts have proven their outstanding running characteristics time and again in numerous applications. In addition to the proven 10 mm pitch, the BATK and BAT belts with a 15 mm pitch are available with immediate effect from all Mulco sales partners. The designer can thus also make use of the advantages of the curved shaped tooth design for their applications involving higher load/stress factors. The distinguishing features of the self-tracking timing belts include higher tooth shear strength, optimal force transmission due to the large number of teeth in mesh at a time, markedly reduced running noise in comparison to spur toothing and a high degree of transmission accuracy along with a low vibration tendency as a result of a low polygon effect.

The antistatic version of BRECOFLEX timing belts

The BRECOFLEX T5, T10, AT5 and AT10 timing belt types available in open length and joined belts are now also available in an antistatic version. They consist of a respectively finished polyurethane and are provided on both sides with a special fabric acting as a nonstick layer with wear protection. The values reached using new belts in continuous testing comply with the ISO 9563 requirements and thus guarantee the necessary discharge of electrical charges to the discharging construction elements of the machines.

Timing belt lock for BRECO T10 and AT10

After the great success of the timing belt lock for the various belt types of the BRECO® ATN system, this lock is now also available for the belt types T10 and AT10. The timing belt locks are available in widths of 50, 75 and 100 mm for both belt types. The main areas of application are low-rated drives requiring notable installation work, where retrofitting the belt in the system offers decisive time-savings and thus cost advantages. Moreover, timing belts with locks can be used as "replacement elements" to prevent impending downtime following malfunction and avoid belt failure possibly resulting. These belts might help prevent total failure, thereby minimizing possible damages.

BRECOFLEX StandardPlus reaches new lengths

With technological equipment becoming more and more complex, BRECO Antriebstechnik, a Mulco partner, is now also able to produce the BRECOFLEX StandardPlus timing belt in lengths ranging between 720 mm and 1700 mm in any number of teeth. At the moment, the product range is comprised of the timing belt types T5, T10, AT5 and AT10 available up to a width of 100 mm. This represents a substantial expansion of the variety of lengths offered by this new generation of polyurethane timing belts.

Hanover, February 2006

www.mulco.net